The Greatest Pressure Change Is Near the Surface


For the sake of simplicity, let’s consider just one of the reasons that a fast ascent during any part of a dive is dangerous. Increased pressure underwater causes a diver’s body tissues to absorb more nitrogen gas than they would normally contain at the surface. If a diver ascends slowly, this nitrogen gas expands bit by bit and the excess nitrogen is safely metabolised and released.

However, the body can only metabolise nitrogen so quickly. The faster a diver ascends, the faster nitrogen expands and must be removed from his tissues. If a diver goes through too great of pressure change too quickly, his body can not metabolise all of the expanding nitrogen and the excess nitrogen forms bubbles in his tissues and blood.

These nitrogen bubbles can cause decompression sickness (DCS) by blocking blood flow to various parts of the body, causing strokes, paralysis, and other life threatening problems. Rapid pressure changes are one of the most common causes of DCS.

What many divers do not realize is that the greatest pressure change during ascents and descents occurs close to the surface. If a diver descends from the surface (1 atmosphere of pressure, or ATA) to 33 feet (2 ATA) the pressure doubles.

If he descends from 33 feet (2 ATA) to 66 feet (3 ATA), the pressure only increases by half. The closer a diver is to the surface, the more rapidly the pressure is changing.

Most divers are familiar with the effects of the increased rate of pressure change near the surface. For example, divers must equalize their ears and adjust their buoyancy more frequently the closer they are to the surface.

This data suggests that divers should be vigilant about their ascent rates near the surface and ascend most slowly through the last fifteen feet of the dive to reduce the risk of decompression sickness.

While a safety stop allows divers to gain control of their ascent and eliminate as much extra nitrogen as possible from their tissues, it is not the end of the dive.

The most critical part of a diver’s ascent is after his safety stop.

Table: Percentage of Pressure Change During Ascent

40-35 ft 2.21-2.06 ATA – 7%
35-30 ft 2.06-1.91 ATA – 8%
30-25 ft 1.91-1.76 ATA – 9%
25-20 ft 1.76-1.61 ATA – 9%
20-15 ft 1.61-1.45 ATA – 11%
15-10 ft 1.45-1.30 ATA – 12%
10-5 ft 1.30-1.15 ATA – 13%
5-0 ft 1.10-1.15 – 15%

Article by: Natalie Gibb Scuba Diving Expert